Cheetah tool document

  Test Point Connection Method Test Point is a hardware-based connection method used to force a device into Bootrom (BROM) or Preloader mode when standard button combinations are not supported or blocked. This method is mainly required on certain MediaTek (MTK) devices where software-based access to Bootrom mode is restricted.   When Is Test Point Required? Test Point is typically used when: Bootrom mode cannot be accessed using buttons The device has restricted or closed Bootrom access Preloader connection is not detected automatically Servicing Samsung MTK devices that do not support button-based BROM entry How Does Test Point Work? By shorting specific test point pads on the device’s motherboard while connecting the phone to a computer via USB, the chipset is forced into a low-level service mode. This allows the software to establish a direct connection with the device. ⚠️ Test Point require [....]

What is Bootrom (BROM) / Preloader Mode? Bootrom mode, commonly referred to as BROM, is a low-level connection state available on devices powered by MediaTek (MTK) chipsets. This mode is activated before the operating system loads and allows direct communication with the device’s hardware. Bootrom is chipset-based rather than brand-specific, which means any device using an MTK chipset can technically support this mode.   How to Connect Devices in Bootrom / Preloader Mode Because MediaTek chipsets are used across many manufacturers, there is no single universal method to enter Bootrom or Preloader mode. The exact connection process depends on the device brand and model. Common connection approaches Samsung (MTK models) On many Samsung devices equipped with MTK chipsets, accessing Bootrom traditionally requires a test point. Since this method is inconvenient, an alternative solution is available that allows Samsung MTK devices to enter BROM mode witho [....]

  Xiaomi FRP Online – Cheetah Tool Pro In this complete guide, we will explore the Xiaomi FRP Online feature in Cheetah Tool Pro, specifically designed for Xiaomi devices. Below, we will explain what this feature is, its main applications, and how to use it effectively. What is Xiaomi FRP? FRP (Factory Reset Protection) – also known as Google Account Lock – is a security feature in Android devices, including Xiaomi, that becomes active after a factory reset. When FRP is enabled, the device will require the Google account credentials previously synced on the phone before it can be set up again. With Cheetah Tool Pro, you can remove this Google lock online in Mi Assistant Mode, without flashing firmware or performing complicated operations. Since the device has already been reset, all previous user data is erased, and the process simply unlocks the device for normal use. Applications of Xiaomi FRP Online in Cheetah Tool Pro Quickly [....]